1. 1U ultra-thin design
2. Class D power amplifier with switch power
3. Each channel has independent Clip Limiter and Low Filter
4. Complete amplifier protection
5. Stereo and Bridge Mono modes of operation
6. Built in 24Bit/96Khz Digital Audio Processor
| Model NO. | | DAP3502D | DAP9002D |
| Type | | Class D 1U Rack Amplifier with DSP | Class D 1U Rack Amplifier with DSP |
| Output RMS | (8Ω, 1kHz) | 2 * 350W | 2 * 850W |
| (4Ω, 1kHz) | 2 * 550W | 2 * 1400W |
| BTL: (8Ω, 1kHz) | 1100W | / |
| Frequency Response | | 20 Hz - 20 kHz±3dB | 20 Hz - 20 kHz±3dB |
| TND | | 1% (8Ω, 350W) | 1% (8Ω, 850W) |
| Input Sensitivity | | +4dB * (1.23V) | +4dB * (1.23V) |
| Input Impedance | | 10kΩ (Balanced) | 10kΩ (Balanced) |
| S/N Ratio | | ≥80dB | ≥80dB |
| Connector | | Input (CH1-2): XLR input connector
Output (CH1-2): SPEAKON output
Power: AC Power Supply | Input (CH1-2): XLR input connector
Output (CH1-2): SPEAKON output
Power: AC Power Supply |
| Indicators | | Power Indicator * 1 (Green)
Input Indicator * 2 (Yellow)
Peak Indicator * 2 (Red)
Protect Indicator * 1 (Red) | Power Indicator * 1 (Green) Input Indicator * 2 (Yellow) Peak Indicator * 2 (Red) Feedback Protect Indicator * 1 (Red) |
| Power Supply | | AC 110~120V 50/60Hz or AC 220~240V 50/60Hz | AC 110~120V、50/60HZ AC 220~240V 50/60HZ |
| Power Comsumption at 1/8 Power | | 110W | 275W |
| Working Temperature Range | | 0~50℃ | 0~50℃ |
| Working Humidity Range | | Under 90% RH（But it can not be condensation) | Under90% RH（But it can not be condensation) |
| Dimensions | | 483mm * 45mm * 240mm (19'', 1U) | 483mm * 45mm * 355mm (19'', 1U) |
| Net Weight | | 3.40kg | 5.50kg |
Leave Your Message